ANKA 1/2" Female NPT Thread Elbow

1/2 Pipe x 1/2 Female NPT Thread Female Elbow
This 1/2 inch x 1/2 inch female elbow is manufactured from high grade fiberglass reinforced nylon. It is non corrosive; using high quality materials approved for use with drinkable water. Designed to connect a range of ID nominally sized polyethylene pipe, tube and hose with varying wall thicknesses. Connection can be made by hand, without tools. It is re-usable and utilizes a unique way to connect pipe without the need for multiple replacement parts. The unique blue captive nut seals stays on the ridge and seals the pipe on the ridge. Female NPT inlet and barb outlet connection type, fits 1/2 inch nominally sized polyethylene pipe, tube and hose. Used for the most rigorous agricultural and horticultural uses. Maximum pressure is 230 psi and maximum temperature is 140 degrees F.


  • Connection can be made by hand, and without tools
  • Fittings are reusable
  • Will handle 230 psi pressure
  • Non corrosive
Minimum Temperature-Fahrenheit32
Minimum Temperature - Celsius0.00
Inlet Connection Size-Metric15 MM
Inlet Connection TypeBarb
Outlet Connection TypeFemale Threaded
Maximum Working Pressure-BAR16.00
Inlet Connection Size1/2 IN
Maximum Working Pressure-PSI230
Buy American Act CompliantNO
Maximum Working Temperature-Fahrenheit140
Maximum Working Temperature-Celsius0.00
Lead FreeYES
Outlet Connection Size1/2 IN

The double barbed insert connection with a captive nut securly grips the hose or pipe for a leak free fit. The barb is tapered and non restrictive, allowing for full flow. Anka fittings are easy to install by hand, without any special tools. 

Anka captive nut for pip fittings

How to install ANKA fittings


ANKA pipe fittings give you an easy to use, leak free connection for rural, municipal, pump and pressure, irrigation, agricultural, hydroponic, industrial, lanscaping and marine applications. They can be used on poly pipe, clear or braided hose, garden or a wash down hose. 

Anka Pipe Fittings and Adaptors