Farms require irrigation systems. It’s unrealistic to expect a farmer to walk around and water every crop. This isn’t necessary, thanks to modern technology. Instead, folks can use irrigation systems to do the job for them. As advantageous as these tools are, installing them can be a pain. Novice farmers should follow this guide on how to install an agricultural irrigation system if they need extra assistance. Implementation isn’t all fun and games. It takes effort and concentration.

Get Rid of the Sod

There are many “cool” steps involved in installing an irrigation system. However, we must go over the basics before getting into the nitty-gritty. First and foremost, individuals must remove any sod from the surrounding areas. The less sod around, the easier it’ll be to use a pulley system to put in the pipes.

Obtain the Right Equipment

Obtaining the right equipment is perhaps the most significant step in installing an agricultural irrigation system. Farmers must be sure they’re purchasing tools and materials from a reputable dealer who has their best interests in mind. Here at Rural Water Direct, we’ll never try to oversell someone to make a profit. Instead, we’ll inform them of the different types of irrigation systems and provide them with the necessary tools to succeed.

What’s a Vibratory Plow?

Now we can get into the modern technology part of the process! It’s best to use a vibratory plow to implement a piping system. Essentially, people pull the pipes through a hole in the system so that they can go underground. There are a few things folks must do before renting one of these machines, including:

  • Call local municipalities to locate utilities before going underground.
  • Users must avoid tree roots to keep the machine and pipes in solid condition.
  • Determine what type of soil they have so that they can rest easy knowing they’re using the correct machine.
  • Manually dig around utilities to ensure nothing is hit or damaged.

Correctly Cut the Pipes

After everything is out, it’s time to measure and get exact cuts. People may feel inclined to use a saw to cut the pipes. Please, avoid this urge! Instead, farmers can use an inexpensive poly pipe cutter to get the job done. Purchase a brightly colored tool that can be spotted in the grass. Using a saw will leave the edges uneven, and plastic shavings can get caught in the sprinkler head.

What About Kinks?

Everyone’s natural urge is to straighten out a pipe when they see a kink. People should avoid taking this action when they install irrigation systems. Instead, farmers should cut out the kinks and use a coupler to connect the two spots. Why? A kink will never be completely straight. For this reason, it’s better to eliminate the issue entirely and ensure smooth water passage through the pipes.

Clean Pipes = a Happy Life

Another step in how to install an agricultural irrigation system is to clean the pipes. Dirt and debris can impact the effectiveness of an irrigation system. Larger pieces of debris can even damage the system and cause it to break entirely. For this reason, users should place a small piece of duct tape around the pipes’ ends to ensure that nothing makes its way inside. If something does get through, the farmer should flush the entire system.

What About the Main Lines?

The main lines of a water supply are always pressurized. As a result, agriculturists must try even harder to protect against leaks. The best way to do this is to double clamp the main lines. Clamps can help hold down the piping system when water runs through it. It’s better to use two clamps in this case because the supply is so heavily pressurized.

Make Sure There’s Enough Room

The worst thing that could happen to a novice farmer is getting to the final steps of the implementation process only to realize there’s not enough room. It’s critical to measure everything before starting installation. The farmer should know exactly where everything needs to go to work correctly. If things aren’t measured properly, then farmers could have to start installing things all over again.

Wire Protection

The final step in how to install an agricultural irrigation system is to ensure wire protection. Every agriculturist knows summer is a rainy season. Typically, this is a good thing because it means the irrigation systems can take a day off. Yet, rainy days aren’t so great for the exposed wires these mechanisms leave behind. It’s vital to protect wires from the elements to ensure the system stays in working condition. If one wire were to become damaged during a storm, the entire irrigation system could suffer.

Knowing how to install an agricultural irrigation system is key to being a successful farmer. Farmers without irrigation systems waste time and energy watering each crop individually. Although the systems are a substantial investment initially, they make up for that tenfold in the future. Automated systems, in particular, are helpful because they conserve water and energy. Instead of the farm owner having to turn everything off at the end of the day, the system will do it for them.

Rural Water Direct’s primary mission is to help farmers succeed. As a result, we offer top-quality agricultural supplies, like irrigation check valves, to ensure they have everything they need. Our team is proud of the products we offer, and we’re happy to answer any questions that come with them. No one should underestimate the importance of a superior irrigation system. Farms with the correct mechanisms end up with healthier crops and save more energy than those that don’t have them. In addition, these tools exist to make the farmer’s life easier. There’s no need to keep things old school when modern technology is here to help. It’s time to embrace the times and take Rural Water Direct along for the ride.