Residential homes aren’t the only places that can benefit from a quality irrigation system. In fact, any area with a large plot of land needs a steady supply of water to maintain lush greenery. Even commercial properties require reliable water distribution to make their gardens pop and their landscaping stand out to those who pass by. Read on to learn how commercial irrigation systems work and their importance to building upkeep.

What Is a Commercial Irrigation System?

Commercial irrigation systems are a sprinkler setup designed to distribute water over a larger surface area. While residential irrigation only needs to accommodate a single-family yard, commercial models are larger scale to work with apartments, businesses, and agricultural properties. As such, the zone size per each individual sprinkler is much bigger, and the piping must handle pushing more water through at a given time. Commercial irrigation systems regulate how much water an area gets and when it was last activated. As such, they’re much easier for operators to control.

Primary Components

Commercial irrigation systems consist of a main pipeline, several sprinkler heads, backflow valves, and a primary controller unit. Each part works together to not only draw in water and transport it, but to also manage contamination and monitor exactly how much water a lawn receives. Here’s a deeper breakdown of these essential parts:

  • Mainline: a public pipeline that provides a property with its municipal water supply. A single line runs from the mainline to connect it to the building.
  • Pipes and Fittings: several other pipes and fittings branch out from the single supply line. They connect the water to the sprinkler heads.
  • Master Valve: this valve sits before any zoning valves and can shut off the entire irrigation system in the event of a line break.
  • Backflow Preventer: a device responsible for preventing cross-contamination. It does this by keeping water from draining backwards when the system deactivates.
  • Sprinkler Heads: where the system releases the water in controlled intervals to water a property.
  • Controller and Sensors: devices that track and control the quantity of water distributed at a time. They also set timers to activate and deactivate certain zones.

Running an Irrigation Assembly

Just knowing the different parts of these structures isn’t enough. To fully understand how commercial irrigation systems work, it’s vital that you know how they all interact together.

To begin, the mainline pushes pressurized water through a property’s supply pipe, which splits off into the irrigation system. The water passes through the master valve and backflow preventer. This ensures that any access water can no longer return to the mainline. The water then rests against the sprinkler heads until they’re activated.

When it’s time to water a particular zone, the controller will send a signal to the designated sprinkler. Then, once the sensor indicates that the ground is sufficiently watered, the controller deactivates that zone and triggers another sprinkler.

For more information about commercial irrigation systems, reach out to Rural Water Direct. As premium farm irrigation equipment suppliers, we know the ins and outs of irrigation and will work with you to determine the best layout for your property. Contact us today to learn how we can help you use water more efficiently and keep your crops and garden healthy.