APEX 1-3/4" Black Plastic Top Entry Diaphragm Activated Float Valve with Float
- Runs at Full Flow Until Trough is Full
- Diaphgram Activated Valve
- Armless Design, Less Damage from Livestock
- UV Stabilized and Corrosion Resistant
This 1 3/4 inch diaphragm float valve utilizes a unique way of operation where the pin moves out of the tip of the jet center, pushing any accumulated debris which reduces the valve from blocking. The diaphragm valve operates at full flow when in the open position reducing wear and tear on the pump while also saving electricity. The diaphragm valve shuts off the supply of water slowly avoiding any chance of creating water hammer.
Product Specifications
APEX XF Series Specifications Sheet
In areas where the temperature can be lower than 34°F (1°C) (minimum service temperature) trough valves must be installed as bottom or side entry but NOT top entry.
Working Pressure: 4 – 175 psi (30 – 1200 kPa)
Maximum Water Temperature: 140°F (60°C)
Minimum Water Temperature: 34°F (1°C)
Materials
Body: Acetyl
Spring: 304 S/S
Seals & O-Rings: Nitrile
Diaphragm: Nitrile
Watts Brochure
More Diaphragm Trough Valves
Troughs that require backflow prevention should use the top mount valve. Whereas troughs with potential for freezing should use the bottom mount valve.
Rural Water Direct carries other float valve types that are a plunger or piston activated.
